> ## Documentation Index > Fetch the complete documentation index at: https://docs.sampler.meiji.industries/llms.txt > Use this file to discover all available pages before exploring further. # RMX Series > Audible previews for the RMX Series PerformFX presets, rendered through the real engine. # RMX SeriesEvery preview is one bar dry → two bars engaged → release and tail, rendered through the production engine with the preset's canonical FX Library settings.### BPF EchoPort of the RMX-1000 Scene FX BPF Echo: a quarter-note echo whose repeats are band-limited to the mids, with moderate feedback so they recirculate without washing out. Scene FX sets the macro intensity and Sub Param 1 narrows the band.**Listen for:** After the dry bar, the quarter-note repeats come back mid-heavy (top and bottom trimmed away), then thin out through the final bar.**Settings:** Division `1/4` · Quantize `Off` · Wet `65%` BPF Echo \ ### EchoPort of the RMX-1000 Scene FX Echo, the classic throw: quarter-note repeats with heavy high-end damping, so each pass returns darker than the last. Scene FX pushes the feedback for longer trails.**Listen for:** Notice how each repeat comes back duller than the one before it, sinking into the tail across the final bar.**Settings:** Division `1/4` · Quantize `Off` · Wet `60%` Echo \ ### NoisePort of the RMX-1000 Scene FX Noise, running on the dub-siren engine: it layers a white-noise wash over the loop at 45% wet so the beat stays in front. Scene FX sets the noise intensity, from soft air to a full blast.**Listen for:** After the dry bar, a noise bed swells in under the loop for two bars, then falls away on release.**Settings:** Division `1/4` · Quantize `Off` · Wet `45%` Noise \ ### Spiral UpPort of the RMX-1000 Scene FX Spiral Up: a quarter-note echo with near-runaway feedback and bright repeats, so a held press regenerates into a climbing wash. Scene FX scales the spiral from a slow climb to maximum lift.**Listen for:** Hear the repeats stack and brighten into a swelling build across the two engaged bars, then unwind during the final bar.**Settings:** Division `1/4` · Quantize `Off` · Wet `65%` Spiral Up \ ### Reverb UpPort of the RMX-1000 Scene FX Reverb Up: a large reverb with a long swelling decay and 30 ms of pre-delay, tuned as a riser. Space keeps blooming behind the loop the longer it is held.**Listen for:** After the dry bar, the room opens up and keeps swelling behind the loop, with the tail ringing on through the final bar.**Settings:** Division `1 Bar` · Quantize `Off` · Wet `65%` Reverb Up \ ### HPF EchoPort of the RMX-1000 Scene FX HPF Echo: quarter-note repeats voiced bright and thin, keeping only the airy top end while the body of the loop stays put. Raising Scene FX thins the repeats further.**Listen for:** Listen for bright, weightless repeats floating above the groove after the dry bar, fizzing out over the last bar.**Settings:** Division `1/4` · Quantize `Off` · Wet `65%` HPF Echo \ ### LPF EchoPort of the RMX-1000 Scene FX LPF Echo: quarter-note repeats with the damping corner set low, so echoes come back dark and sink under the loop like a dub delay.**Listen for:** After the dry bar, murky low-passed repeats pool underneath the beat and keep darkening as they fade through the final bar.**Settings:** Division `1/4` · Quantize `Off` · Wet `65%` LPF Echo \ ### Crush EchoPort of the RMX-1000 Scene FX Crush Echo, routed to the beat-repeat engine at full wet: it locks the loop into a sixteenth-note stutter with a degraded, crushed edge, and Sub Param 2 piles on more dirt.**Listen for:** After the dry bar, the loop snaps into a crushed sixteenth-note stutter for two bars, then drops back clean on release.**Settings:** Division `1/16` · Quantize `Off` · Wet `100%` Crush Echo \ ### Spiral DownPort of the RMX-1000 Scene FX Spiral Down: the darker sibling of Spiral Up, a quarter-note echo whose feedback wash dulls and sinks instead of climbing. Scene FX scales the descent from a slow sink to a full drop.**Listen for:** Hear the repeats pile up and grow darker across the engaged bars, sagging downward before the tail dies out.**Settings:** Division `1/4` · Quantize `Off` · Wet `65%` Spiral Down \ ### Reverb DownPort of the RMX-1000 Scene FX Reverb Down: the same large room as Reverb Up but with a shorter decay and tighter pre-delay, tuned as a falling gesture for drops rather than a swelling build.**Listen for:** After the dry bar, a big but controlled space wraps the loop for two bars, then contracts quickly once the effect releases.**Settings:** Division `1 Bar` · Quantize `Off` · Wet `65%` Reverb Down \ ### Cut/AddPort of the RMX-1000 Isolate FX Cut/Add: a three-band Low/Mid/Hi isolator sharing the Equalizer engine's deep-cut kill range, so pulling a band fully down removes it entirely.**Listen for:** The canonical preview is neutral: the bands sit flat, so the loop passes through unchanged; cut or boost a band in the app to hear the isolator bite.**Settings:** Division `1/4` · Quantize `Off` · Wet `100%` Cut/Add \ ### Trans/RollPort of the RMX-1000 Isolate FX Trans/Roll, running on the rhythmic-gate engine at full wet: it chops the loop into grid-locked on/off slices, sixteenth notes by default.**Listen for:** After the dry bar, the loop turns into a transformer-style sixteenth-note chop for two bars, then flows continuously again.**Settings:** Division `1/16` · Quantize `Off` · Wet `100%` Trans/Roll \ ### Gate/DrivePort of the RMX-1000 Isolate FX Gate/Drive, routed to the rhythmic-gate engine at full wet: it slams the loop on and off at the grid, defaulting to sixteenth notes for a hard, stuttering pump.**Listen for:** Notice the full silences punched between the sixteenth-note hits during the two engaged bars: a hard cut, not a volume dip.**Settings:** Division `1/16` · Quantize `Off` · Wet `100%` Gate/Drive \ ### RollPort of the RMX-1000 X-PAD Roll: a beat repeat that captures the current slice and rolls it at the Repeat Rate (1/8 through 1/1), with a bipolar Pitch control that bends rolls upward or downward.**Listen for:** After the dry bar, one slice locks into a repeating roll for two bars, then the loop picks up where it left off.**Settings:** Division `1/8` · Quantize `Off` · Wet `100%` Roll \ ### X-Pad KickPort of the RMX-1000 X-PAD Kick pad, voiced on the beat-repeat engine: it retriggers the loop in a four-on-the-floor kick pattern, with Pitch available to drop the hits lower for extra boom.**Listen for:** Hear the quarter-note retriggers stomp through the two engaged bars like a four-to-the-floor kick before the original groove returns.**Settings:** Division `1/8` · Quantize `Off` · Wet `80%` X-Pad Kick \ ### X-Pad SnarePort of the RMX-1000 X-PAD Snare pad on the beat-repeat engine: it stamps retriggers into backbeat positions, with build variants that tighten into sixteenth- and thirty-second-note rushes.**Listen for:** After the dry bar, listen for the backbeat-spaced retriggers cracking across the loop, then the pattern releasing back to the dry groove.**Settings:** Division `1/8` · Quantize `Off` · Wet `80%` X-Pad Snare \ ### X-Pad ClapPort of the RMX-1000 X-PAD Clap pad on the beat-repeat engine: retriggers land on the 2 and 4 like a clap layer, and Pitch can lift them for a brighter snap.**Listen for:** Count the retriggers landing on beats 2 and 4 during the two engaged bars before the loop runs clean again.**Settings:** Division `1/8` · Quantize `Off` · Wet `80%` X-Pad Clap \ ### X-Pad Hi HatPort of the RMX-1000 X-PAD Hi Hat pad on the beat-repeat engine: it ticks retriggers at eighth notes by default, with sixteenth and triplet subdivisions for busier hat figures.**Listen for:** After the dry bar, an eighth-note tick of retriggers rides on top of the loop for two bars, then drops away.**Settings:** Division `1/8` · Quantize `Off` · Wet `80%` X-Pad Hi Hat \ ### SamplerPort of the RMX-1000 X-PAD Sampler: a longer-window beat repeat that captures up to a full bar of the loop and cycles it, with Pitch able to chipmunk the capture upward.**Listen for:** Notice how the bar that just played folds back on itself and loops through the engaged bars, then hands back to the live groove.**Settings:** Division `1/8` · Quantize `Off` · Wet `80%` Sampler \ ### Vinyl BrakePort of the RMX-1000 Release FX Vinyl Brake on the tape-stop engine: it pitch-dives the loop to a true standstill over the Range window using the constant-torque vinyl Brake Curve, with highs rolling off naturally on the way down and a click-free landing.**Listen for:** After the dry bar, the record grinds down to a dead stop and holds, then spins back up to speed in the final bar.**Settings:** Division `1 Bar` · Quantize `Off` · Wet `100%` Vinyl Brake \ ### Release EchoPort of the RMX-1000 Release FX Echo, the hand-off gesture: it throws the loop into a generous-feedback, medium-toned echo whose Range sets the echo window, and Hold Previous FX can keep an active effect running through it.**Listen for:** As the press lets go, the loop hands off into repeats that keep ringing across the final bar instead of cutting dead.**Settings:** Division `1/4` · Quantize `Off` · Wet `70%` Release Echo \ ### Release Back SpinPort of the RMX-1000 Release FX Back Spin: it snapshots the audio that just played and wheels it backward, accelerating from a standstill into a fast reverse spin, with Speed setting how hard it winds up. The spin-up and terminal stop are click-free.**Listen for:** After the dry bar, the beat rewinds into an accelerating backward blur, then the groove drops back in playing forward.**Settings:** Division `1 Bar` · Quantize `Off` · Wet `100%` Release Back Spin \ This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.